Philips UVC Upper Air Disinfection System Wall Mounted

Available. Ships within 2 weeks.

As part of the Philips UV-C disinfection upper air device series, Philips UV-C disinfection upper air wall mounted is designed to be installed on walls for the disinfection of air in a wide range of applications. Optimized for low ceiling heights, the UV-C rays are distributed at device level and above. The beam of UV-C rays is controlled by specific reflectors and the louvre design. This allows for the disinfection of the air in a space, while ensuring that day-to-day business activities can continue underneath the area where the device is active.

Benefits

• Philips UV-C disinfection upper air wall mount luminaires inactivated 99.99% of viruses, in the air of a room within 10 minutes. At 20 minutes, the virus was below detectable levels
• Swift disinfection effect, with 83.6% reduction of viruses, achieved in a room within 2 minutes
• Allows quiet disinfection of air while business activity continues underneath the device’s level
• Allows disinfection of a large volume of air while business activity continues
• Uses Philips UV-C lamps and drivers
• Environmentally friendly - no ozone emissions during or after use
• Optimized for low ceiling heights, the UV-C rays are distributed at device level and above

Features

• Louvres and reflector control the distribution of UV-C at the device level and above, where people are not usually present
• Shortwave UV radiation peak at 253.7 nm (UV-C)
• Wall mounted installation
• Complies with IEC 62471 standard for photobiological safety

Example Applications

• Offices
• Retail
• Food Outlets
• Rooms (aka UV Room Sterilizer / UV Room Sanitizer)
• Schools/Universities
• Hospitality (Hotels, Restaurants etc)
• Banking
• Washrooms
• Health (Hospitals, Clinics, Nursing Homes etc)
• 1 unit typically required for 20 m2 area

Specifications

• Number of light sources 1 pc
• Number of gear units 1 unit
• Gear HF-S  [ HF Selectalume]
• Optic type Lamellae louver
• Protection class IEC Safety class I
  
• Glow-wire test Temperature 650 °C, duration 30 s
• CE mark Yes
• EU RoHS compliant Yes
  
• Input Voltage 230 V
• Input Frequency 50 Hz
• Inrush current 18 A
• Inrush time 0.35 ms
• Power Factor (Min) 0.98
• Housing Material Aluminum
• Reflector material Aluminum
• Optic material Aluminum
• Mounting device Wall-mounting bracket
• Overall length 553 mm
• Overall width 185 mm
• Overall height 140 mm
• Color White and black
• Dimensions (Height x Width x Depth) 140 x 185 x 553 mm (5.5 x 7.3 x 21.8 in)
• Ingress protection code IP20  [ Finger-protected]
• Mech. impact protection code IK02  [ 0.2 J standard]
• UV-C radiation 0.375 W
• UV-C irradiance defined at 2m 35.57 µW/cm²
• UV-C irradiance defined at 20cm 426.62 µW/cm²
• Initial input power 29.6 W
• Power consumption tolerance +/-10%
• Ambient temperature range +10 to +40 °C
• Performance ambient temperature Tq 25 °C
• Net Weight (Piece) 6.290 kg