Philips EBT 236 TLD UV Lamp Ballast/Choke (Qty. 3)
Regular price
Rs. 1,740.00
In Stock. Ships within 5 business days
Suitable for double UV lamp of:
- TUV 25W
- TUV 25W T5 4P SE
- TUV 30W
- TUV 36W
- TUV 36T54PSE
- TUV PLL 36W
EB-T Electronic ballasts for TL-D lamps - EBT 236 TLD
Compact, lightweight, high-frequency electronic standard ballasts for TL-D 36 W/TL40 lamps.
Benefits
- The combination of Philips ballast and Philips lamps offers a standard professional lighting system that fulfills all international norms
- 25% energy saving compared with standard electromagnetic ballast system
- Protection against excessive mains voltage and incorrect terminal communications (e.g. output short)
Features
- Flicker-free pre-heat (rapid-start) lamp ignition enables the lamps to be switched on and off without reducing useful life
- Offers low mains-current harmonic distortion of <10%
- End-of-life protection
- Switching cycle 6500 times
General Information
- Automatic Restart Yes
Operating and Electrical
- Input Voltage 220 to 240 V
- Input Frequency 50 to 60 Hz
- Operating Frequency (Min) 42 kHz
- Ignition Method Rapid Start
- Crestfactor (Max) 1.7
- Power Factor 100% Load (Nom) 0.98
- Ignition Time (Max) 0.45 s
- Mains Voltage Performance (AC) 221-254V
- Mains Voltage Safety (AC) 216-264V
- Earth Leakage Current (Nom) 0.7 mA
- Constant Wattage Deviation Not specified
- Power Losses (Nom) 8 W
Wiring
- Connector Type Input Terminals WAGO 251 universal connector [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
- Cable Capacity Output Wires Mutual (Nom) 150 pF
- Connector Type Output Terminals WAGO 251 universal connector [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
- Wire Striplength 9.0-10.0 mm
- Input Terminal Cross Section 0.50-1.50 mm²
- Output Terminal Cross Section 0.50-1.50 mm²
- Cable Capacity Output Wires to Earth (Nom) 75 pF
- Connector Type Output Terminals WAGO 251 universal connector [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
System characteristics
- Rated Ballast-Lamp Power 36 W
Temperature
- T-Ambient (Max) 50 °C
- T-Ambient (Min) 0 °C
- T-Storage (Max) 85 °C
- T-Storage (Min) -40 °C
- T-Case Maximum (Max) 75 °C
- T-Ignition (Min) 0 °C
Emergency Operation
- Battery Voltage Lamp Ignition 198-254 V
- Battery Voltage Lamp Operation 176-254
Approval and Application
- Energy Efficiency Index A3
- EMI 9 kHz ... 30 MHz EN 55015 edition 7.1
- EMI 30 MHz ... 1000 MHz EN 55022
- Safety Standard IEC 61347-2-3
- Performance Standard IEC 60929
- Harmonic Current Emission Standard IEC 61000-3-2
- EMC Immunity Standard IEC 61547
- Vibration Standard IEC68-2-6 F c
- Bumps Standard IEC 68-2-29 Eb
- Humidity Standard EN 61347-2-3 clause 11
- Approval Marks CE marking S Mark
- Temperature Marking Not specified
- Hum And Noise Level Inaudible
- Net Weight (Piece) 0.205 kg