Philips HF-P 180 TL5 III 220-240V 50/60Hz UV Lamp Ballast/Choke

Rs. 1,850.00

In Stock. Ships within 5 business days

Suitable for single UV lamp of:

TUV 75W HO
TUV 64T5 HE 4P SE

HF-Performer III for TL5 lamps - HF-P 180 TL5 III 220-240V 50/60Hz

HF-Performer III TL5 ballasts offer maximum versatility and meet all of the necessary commercial grade specifications. They also offer the added benefits of lamp striation reduction technology. As such, these ballasts are part of an overall high-efficiency lighting system that may help you or your customers to achieve any international or local energy code you need to comply with. HF-Performer III TL5 ballasts are the ideal choice for a broad range of new construction and retrofit applications within the commercial sector, including general surface mounting or office lighting, parking garages, warehouses, waterproof and other applications.;The ballast is primarily designed for Indoor application. For outdoor application, the luminaire should be minimum ClassⅠand need to be sufficiently protected against water & dust. The installation should also be guard against any lightening surge or any other necessary electrical protection as deemed in such typical installation & application.

Benefits

Exceptional energy efficiency with striation-reduction technology in lighting systems at lower temperatures
Maximum reliability in system operation
Multi-power technology for precise operation of multiple lamp types of various wattages

Features

Highest CELMA Energy Efficiency Index A2 BAT
Complies with CE, ENEC, EL, VDE-EMC, CCC marks of conformity
Average nominal service lifetime over 100,000 hours (at Ta 50 °C) with a failure rate ≤ 0.1 % per 1,000 hours)
Optimized lamp preheating for over 50,000 On/Off switch operations without replacement of lamps

Applications

Suitable for DC operation and emergency lighting installations; full compliance with requirements for emergency lighting according to EN 61347-2-3 -annex J
Extended lamp life in frequent-switching applications, e.g. where occupancy sensors or motion detectors are used
For luminaires of protection class I and protection class II used in hospitals and industrial premises

General Information

Application Code III
Type Version IDC
Number of Products on MCB (16A Type B) (Nom) 20
Automatic Restart Yes

Operating and Electrical

Input Voltage 220 to 240 V
Input Frequency 50 to 60 Hz
Operating Frequency (Nom) 45 kHz
Ignition Method Programmed Start
Crestfactor (Max) 1.7
Power Factor 100% Load (Nom) 0.99
Ignition Time (Max) 0.9 s
Mains Voltage Performance (AC) -8%-+6%
Mains Voltage Safety (AC) -10%-+10%
Earth Leakage Current (Nom) 0.5 mA
Inrush Current Width 0.30 ms
Constant Wattage Deviation -2%/+2%
Ballast Factor (Nom) 1
Power Factor (Nom) 0.99
Power Losses (Nom) 4-4.5 W
Inrush Current Peak (Max) 24 A

Wiring

Connector Type Input Terminals WAGO 251 universal connector [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Cable Capacity Output Wires Mutual (Nom) 200 pF
Connector Type Output Terminals WAGO 251 universal connector [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Cable Length Hot Wiring 0.75 m
Wire Striplength 8.0-9.0 mm
Dual Fixture Master/Slave Not applicable [ Master/Slave oper. not applicable]
Input Terminal Cross Section 0.50-1.00 mm²
Output Terminal Cross Section 0.50-1.00 mm²
Cable Capacity Output Wires to Earth (Nom) 200 pF
System characteristics
Rated Ballast-Lamp Power 80 W
Rated Lamp Power on PL-L 80 W
System Power on PL-L 78 W
Lamp Power on PL-L 74 W
Power Loss on PL-L 4 W
Rated Lamp Power on TL5 80 W
System Power on TL5 75 W
Lamp Power on TL5 71 W
Power Loss on TL5 4 W
System Power on TL5 ECO 74.5 W
Lamp Power on TL5 ECO 70 W
Power Loss on TL5 ECO 4.5 W

Temperature

T-Ambient (Max) 60 °C
T-Ambient (Min) -25 °C
T-Storage (Max) 50 °C
T-Storage (Min) -40 °C
T-Case Lifetime (Nom) 80 °C
T-Case Maximum (Max) 80 °C
T-Ignition (Max) 60 °C
T-Ignition (Min) -25 °C

Mechanical and Housing

Housing L 360x30x21
Emergency Operation
Nominal Light Output After 60 Seconds 100% of EBLF
Battery Voltage Lamp Ignition 186-275 V
Normal Operating Voltage (DC) 220-240 V
Battery Voltage Lamp Operation 176-275
Battery Voltage Guaranteed Operation 176-275 V
Battery Voltage Guaranteed Ignition 186-275 V
Emergency Ballast Lumen Factor (EBLF) (Nom) 100 %
Nominal Light Output After 5 Seconds 50% of EBLF

Approval and Application

Energy Efficiency Index A2 BAT
IP Classification IP 20 [ Ingress Protection 20]
EMI 9 kHz ... 30 MHz EN 55015 edition 7.1
EMI 30 MHz ... 1000 MHz EN55022 level B
Safety Standard IEC 61347-2-3
Performance Standard IEC 60929
Quality Standard ISO 9000:2000
Environmental Standard ISO 14001
Harmonic Current Emission Standard IEC 61000-3-2
EMC Immunity Standard IEC 61547
Vibration Standard IEC68-2-6 F c
Bumps Standard IEC 68-2-29 Eb
Humidity Standard EN 61347-2-3 clause 11
Approval Marks CE marking ENEC certificate VDE-EMV certificate
Temperature Marking Yes
Emergency Standard IEC 60598-2-22
Hum And Noise Level < 30 dB(A)
Net Weight (Piece) 0.250 kg